Technicians available today

Dryer Not Turning On?

If your dryer is not turning on, has no lights, will not start, clicks but does not run, or the control panel is dead, the problem may be related to power supply, door switch, thermal fuse, start switch, belt switch, motor, timer, or control board. A proper diagnosis helps avoid replacing the dryer too early.

Fast Book Online Service call fee $0 - $35 / Original parts / Budget friendly

⚠️ Important note: If the dryer has a burning smell, sparks, melted plug, hot outlet, or breaker keeps tripping, stop using it and do not reset the breaker repeatedly. Electrical symptoms should be checked before another cycle is attempted.

Why Your Dryer Is Not Turning On

A dryer needs stable power and several safety switches before it can start. If one part of that start circuit fails, the dryer may stay completely dead, click once, show lights but not run, or stop immediately after pressing Start.

No power at outlet or breaker issue — the dryer may appear completely dead.
Door switch failure — the dryer will not start if it cannot detect the door is closed.
Thermal fuse failure — the dryer may stop starting after overheating or airflow restriction.
Start switch or push-to-start button issue — lights may work but the dryer will not begin.
Belt switch problem — some dryers will not start if the belt is broken or not detected.
Motor failure — the dryer may hum, click, or fail to turn the drum.
Timer or control board issue — the dryer may not send the correct command to start.

Common Signs

Dryer has no lights and no response
Dryer lights up but will not start
Dryer clicks once but does not run
Drum does not turn when Start is pressed
Dryer hums but will not spin
Breaker trips when the dryer starts
Dryer stopped suddenly and will not restart

Quick Checks Before Booking

Make sure the dryer door is fully closed.
Check that the dryer is firmly plugged in.
Check the breaker once, but do not keep resetting it if it trips again.
Try a different cycle setting if the control panel is responsive.
Do not force the Start button if the dryer hums, clicks, or smells hot.

If the dryer still will not turn on after these checks, it is better to diagnose the start circuit before replacing parts or buying a new dryer.

Dryer Has Power but Will Not Start

If the display lights up but the dryer will not run, the issue is often inside the start circuit rather than the outlet. Common causes include a bad door switch, start switch, thermal fuse, belt switch, timer, motor, or control board.

Clicks but does not run: possible motor, relay, switch, or control issue.
Lights on but no start: possible door switch, thermal fuse, or start button issue.
Humming sound: possible motor, blower wheel, drum support, or jammed component.

Dryer Completely Dead

If there are no lights and no response at all, the issue may be power-related or internal. Electric dryers may need proper 240V power, while gas dryers still need electrical power for the motor, control, igniter, and safety circuits.

Outlet or breaker problem
Damaged power cord or terminal block
Blown thermal fuse after overheating
Failed control board or timer