Technicians available today

Dryer Not Heating?

If your dryer is running but not heating, clothes may stay wet, take multiple cycles to dry, or come out only slightly warm. This can happen on both gas and electric dryers. The issue may be a simple airflow restriction, a failed thermal fuse, heating element, igniter, gas coils, thermostat, sensor, power supply, or control problem.

Fast Book Online Service call fee $0 - $35 / Original parts / Budget friendly

⚠️ Important note: Do not keep running the dryer for many cycles if it is not heating. Long dry times can point to restricted airflow, overheating protection, or failing heating components. Fixing the cause early can prevent more expensive damage.

Why Your Dryer Is Not Heating

A dryer needs three things to dry clothes properly: heat, airflow, and drum movement. If one part of that system fails, the dryer may run normally but never get hot enough to dry the load. Gas and electric dryers use different heating systems, so the exact cause depends on your model.

Thermal fuse failure — a very common reason a dryer runs but produces no heat.
Heating element issue — electric dryers may run with no heat if the element is burned out.
Igniter or gas coil problem — gas dryers may tumble but fail to ignite or stay heated.
Clogged vent or weak airflow — restricted airflow can trigger overheating protection and poor drying.
Thermostat or temperature sensor failure — the dryer may not control heat correctly.
Power supply issue — some electric dryers can run but not heat if one leg of 240V power is missing.
Control board or timer issue — the dryer may not send power to the heating circuit.

Common Signs

Dryer runs but clothes stay wet
Dryer has no heat or only weak heat
Clothes take two or three cycles to dry
Dryer heats for a few minutes, then stops heating
Gas dryer clicks but does not ignite
Electric dryer tumbles but stays cold
Dryer shuts off early or feels too hot without drying well

Quick Checks Before Booking

Clean the lint screen and try a normal-size load.
Check if warm air is coming out of the outside vent while the dryer runs.
Do not overload the dryer, especially with towels or bedding.
If it is a gas dryer, check that the gas valve is open and the dryer is connected properly.
If it is an electric dryer, avoid resetting breakers repeatedly if the problem returns.

If the dryer still has no heat after these quick checks, it is better to diagnose the heating system before replacing parts or buying a new dryer.

Gas vs Electric Dryer No Heat

The repair path depends on the dryer type. A gas dryer may tumble with no heat because of an igniter, gas valve coils, flame sensor, or burner assembly issue. An electric dryer may tumble with no heat because of a heating element, thermal fuse, high-limit thermostat, wiring, or 240V power supply issue.

Gas dryer: clicking but no flame, heats once then stops, or never ignites.
Electric dryer: drum turns but stays cold, weak heat, or breaker-related symptoms.
Both types: clogged venting can cause poor heat, long drying, overheating, and fuse failures.

When Dryer Not Heating Becomes Urgent

A dryer with no heat is not always dangerous, but repeated overheating, weak airflow, burning smell, or shutdowns should be handled quickly. These symptoms can damage internal parts and may increase fire risk when lint or restricted airflow is involved.

Dryer is very hot but clothes are still wet
Dryer keeps blowing thermal fuses
Burning smell appears with no heat or weak heat
Vent airflow is weak outside the home